GNSS GPS Agriculture Handheld GPS Survey Equipment High Accuracy

GNSS GPS High Accuracy Agriculture Land Area Measuring Tools Handheld GPS Survey Equipment

Round-trip machine load:

1. At the Round-trip machine load in parameter setting,press the [▲/▼]button to set the width.

2. After setting is completed,press the to return main interface.

3. Press the [▲/▼]button switch function to Round-trip machine load"in the main interface.

4. Press [Start] button at the starting point to start the measurement at the beginning of the work.Press the [Stop] button to pause measurement

and view data after agricultural machinery work is completed;If the measurement is not completed,press the [Start] button again to continue the

measurement. If the measurement is completed,press power button to save the data.

Circle machine load measurement:

1. Circle machine load measurement function is used to measure area around the land, set the position of the land meter in the vehicle and the

nearest distance of the ground boundary, and then measure the boundary around the region.Then measuring around the boundary of the land.

2. At the Circle machine load in parameter setting, press the [▲/▼]button to set the edge distance.

3. After setting is completed, press the to return main interface.

4. Press the [▲/▼]button switch function to Circle machine load"in the main interface.

5. In the main interface, press the[ Start] button to measure at starting point.

6. After a circle around the land under test, press the[ Stop ] button to end measurement and view data press power button to save data.

Length and width area measurement:

① In the main interface,press the ▲▼to switching function to “Length and width”.

② At the starting point A press the【Start】button to measure,and press the【Enter】button to save the point A,go to the inflection point B,and press the【Enter】button to save the point B,go to the inflection point C,press the【Enter】button to save point C.

③ Press the【Stop】button to end measurement and view data,and press power button to save the data.

Note: if you want to end the measurement before 3 points are collected,Press the【Stop】button to pause the measurement.

Fixed width area measurement:

① At the Fixed width in parameter setting, press the ▲▼button to set the width.

② After setting is completed,press the power button to return main interface.

③ Press the▲▼button switch function to “Fixed width”in the main interface；press the【Start】button to measure in starting point；Press【Stop】button to pause measurement when measuring to the bottom line and view data；If the measurement is not completed, press the【Start】button again to continue the measurement. If the measurement is completed,press power button to save the data.

Fixed point measurement:

① In the main interface,press the ▲▼to switching function to“Fixed point”.

② At the land starting point,press the【Start】button to start measuring,and press the 【Enter】 button to confirm the information of the starting point.

③ Walk along the edge of the land,press the 【Enter】button at each inflection point to collect the information of each inflection point；

④ After collecting the information of the last inflection point (not coinciding with the starting point),press【Stop】button to pause the measurement and view the data.

⑤ If the measurement is not completed,press the【Start】button again to continue the measurement. If the measurement is completed,press power button to save the data.

Agriculture Handheld GPS Survey Equipment

GNSS GPS Handheld GPS Survey Equipment

S3 GPS Land Area Measurement Tools

GNSS GPS Agriculture Handheld GPS Survey Equipment High Accuracy Images