Mountain Slope Handheld GPS Survey Equipment High Accuracy

Handheld GPS Survey Equipment Mountain Slope Flat Land Measurement High Accuracy Land Measuring Device

Function switch of GPS land meter:

① On the home page of boot,press the▲▼button to switch measurement mode;

② On the home page of boot,press the【Enter】button to view the current measurement mode and the parameter setting.

• Area measurement

• Preparation of measurement

① Turn on the land meter in an open field;

② After started up,it needs to search for signal;There are voice prompts,text prompts,signal state and HDOP value on the screen;It is recommended to start measuring when the HDOP value is below 1.0.

③ After finishing searching for signal,it can start measuring according to function demands.

• Normal area measurement

① At the starting point,press the【start】button to measurement in the main interface.

② Return to the starting point in a circle around the ground,press the【stop】 button to pause the measurement and view the measurement data.

③ Press the "Start" button to end measurement and save data.

• Mountain area measurement (just for S4)

① At the starting point,press the ▲▼to switch function to “Mountain”mode in the home interface;

② Press the 【Start】button to measure at the top of the mountain,then press the 【Enter】 button to confirm the information.

③ Press the【Enter】button and proceed from the foot of the mountain,walk around the foot of the mountain,and back to the starting point,press the【Enter】button,then press the【Stop】button to end measure and view data；

④ press "Start" to save the data.

• Intelligent slope measurement

The way of measuring is similar to normal area measurement.(please refer to normal area measurement method)

Handheld GPS Survey Equipment

Mountain Slope GPS Survey Equipment

Lithium Battery GPS Survey Equipment

Mountain Slope Handheld GPS Survey Equipment High Accuracy Images